Section 179 is the IRS provision that lets your business deduct the full cost of qualifying equipment in the year you place it in service, instead of depreciating it over five or seven years. For 2026, the deduction cap is $1,220,000, and bonus depreciation covers 40% of qualifying purchases above that cap.
In plain terms: if you buy a $40,000 forklift and place it in service by December 31, 2026, you can write off the full $40,000 against this year’s taxable income. At a 24% effective tax rate, that is roughly $9,600 back at tax time. Your net cost on the truck drops to $30,400 before financing.
The catch is the deadline. The IRS does not care when you ordered, when you signed, or when you paid the deposit. It cares when the equipment is placed in service. Here is what that actually means, and how to make sure your 2026 purchase qualifies.
What does “placed in service” mean for Section 179?
Placed in service means the equipment is ready and available for its intended business use. For a forklift, that means delivered to your facility, operational, and ready to run loads by December 31, 2026. It does not mean ordered, invoiced, or in transit.
A forklift sitting on your warehouse floor on December 31, operational and inspected, qualifies for the 2026 deduction. A forklift ordered December 20 but still at the dealer on December 31 does not. It becomes a 2027 deduction instead.
This is where buyers get burned every year. Delivery lead times on new Komatsu, Doosan, and Heli forklifts run two to five weeks depending on capacity, fuel type, and configuration. Attachments, side-shifters, custom masts, and non-standard tires can add another one to three weeks. Orders placed after mid-November carry real risk.
How much do you actually save with Section 179 on a forklift?
The savings depend on your effective tax rate and the price of the truck. Here are the common scenarios:
| Forklift purchase | Effective tax rate | Tax savings | Net cost |
|---|---|---|---|
| $25,000 | 21% | $5,250 | $19,750 |
| $40,000 | 24% | $9,600 | $30,400 |
| $75,000 with attachments | 24% | $18,000 | $57,000 |
| $300,000 fleet buy | 24% | $72,000 | $228,000 |
Financing does not change the deduction. You can finance the forklift, deduct the full purchase price in 2026, and still spread payments over 36 or 60 months. In most cases, the first-year tax savings exceed the full year of loan payments.
What forklifts and equipment qualify for Section 179?
Any forklift used 50% or more for business qualifies, including new and used units, electric, LPG, diesel, and gasoline. Attachments like side-shifters, fork positioners, rotators, and clamps qualify. Battery and charger packages purchased with electric lifts qualify. Related warehouse equipment, including pallet jacks, order pickers, reach trucks, and racking, also qualifies up to the annual cap.
Capital leases qualify. Operating leases do not, because the IRS treats them as rentals rather than purchases. If you are not sure which type of lease you have, ask your lender. The language is in the contract.
Equipment used less than 50% for business does not qualify. Equipment purchased from a related party does not qualify. Equipment placed in service in a different tax year does not qualify for the 2026 deduction, no matter when you ordered it.
What is the difference between Section 179 and bonus depreciation?
Section 179 is capped at $1,220,000 for 2026, phases out dollar-for-dollar after $3,050,000 in total equipment purchases, and cannot create a net operating loss. Bonus depreciation applies on top of Section 179 at 40% for 2026, has no annual cap, and can create a net operating loss that carries forward.
For most single-truck and small-fleet buyers, Section 179 alone covers the full deduction. For larger fleet buyers hitting the cap, the two provisions stack: Section 179 up to the limit, then 40% bonus depreciation on the balance, then regular MACRS depreciation on whatever is left.
Your CPA will run the numbers for your specific situation. We can give you the invoice detail they need.
Why does mid-November matter for 2026 orders?
Mid-November is the last reliable window for new forklift orders that need to be placed in service by December 31. Standard-configuration trucks ship in two to three weeks from most manufacturers. Custom configurations, specialty attachments, and non-stock capacity classes can push that to five or six weeks.
Used inventory ships faster, usually in one to two weeks, because the trucks are already on the ground and inspected. If you need the deduction and the order window is tight, pre-owned Komatsu and Heli lifts are often the cleanest path. Here is what to look for when you buy used.
For custom new orders, waiting until December is a gamble that usually loses.
What do you need to document for the deduction?
Keep the invoice, the delivery receipt or bill of lading dated on or before December 31, the serial number and configuration, the financing paperwork if applicable, and a brief internal note confirming the date the truck went into service. Form 4562 is where the deduction is claimed on your federal return.
Your CPA handles the filing. Your job is to get the truck in service, keep the paperwork, and not miss the window.

